This dishwasher has been specifically designed to meet the rigorous demands of all UK catering outlets from bars & restaurants to pubs, clubs, cafes, care homes, retail, hospitals and caterers.
The standard range is robust, reliable, hygienic and cost effective.
Features:
- - Simple, intuitive and robust controls - one touch operation
- - Double skinned cabinets for additional strength, reduced heat loss and operating levels
- - Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
- - Constructed of catering grade 18/8 AISI stainless steel and non-corrosive materials
- - H x W x D: 815mm x 535mm x 575mm
- - Three 450 x 450mm baskets
- - Loading height (max): 290mm
- - Cycle: 2 minutes
- - Wash tank capacity: 22.0Ltrs
- - Rinse tank capacity: 2.8Ltrs
- - Water consumption per cycle: 2.4Ltrs
- - Wash tank temp: 55 deg C
- - Rinse tank temp: 0-90 deg C
- - Drain outlet hose diameter: 32mm
- - Drain height (max): 180mm
- - Required water Pressure: 2-4bar
- - Water Connection: 3/4BSP
Specifying your machine:
To help make life easier when purchasing your new glasswasher, there are a few key areas that it would be good to understand in order to make sure you get the right product to suit your needs
Do you need a drain pump (DP)?
You need a drain pump if the waste services at the site where you're installing the machine are higher than the drain outlet on the machine when it's in place. A model without a drain pump is a gravity drain model.
Do you need an integral water softener (IWS)?
All warewashing machines require a water softener of some description unless they are in a very soft water area. Integral softeners greatly improve results, prolong machine life, reduce labour costs and save valuable space. Remember, integral water softeners are cold feed only.
Do you need a WRAS approved type'A' break tank (A)?
Type 'A' break-tanks are a stipulation of the water regulation advisory scheme (WRAS) and should be fitted to machines that are to be used as commercial dishwashers and that are connected to the mains water system. All DC break-tank models are fitted with rinse booster pumps for optimum results.
