The SD900 standard range passthrough dishwasher allows for a fast through put of racks due to it's advanced Handling design and increased wash power. It provides a load height of Up to 400mm to accommodate speciality plates and kitchen utensils. Able to work in conjunction with an entry and exit table the SD900 is the vital addition you will need in a busy work environment where budget is key.
Features:
- - Cycle Time (Minutes): 2 & 3.
- - Height (mm): 1475.
- - Width (mm): 655.
- - Depth (mm): 725.
- - Supplied Baskets: 3
- - Basket size: 500 x 500mm
- - Max Loading Height (mm): 400.
- - Wash Tank Capacity (ltrs): 22.
- - Rinse Tank Capacity (ltrs): 5.
- - Water Consumption (ltrs): 2.4 per cycle
- - Rinse Element (watts): 6000.
- - Wash Element (watts): 3000.
- - Pump (watts): 750.
- - Waste Height (mm): 420.
- - Total Load (watts): 6750.
- - Wash Tank Temperature: 55 deg C
- - Rinse Tank Temperature: 80 deg C (or as required)
- - Waste Outlet Diameter (mm): 32.
- - Amps required: 30Amps (Other options available by request)
- - Filters: 1.
- - Double Skinned: Yes.
- - Insulated: Yes.
- - Top Wash Arm: Yes.
- - Rinse and Detergent Peristaltic Dosing Pumps: Yes.
- - Counter Balanced Door: No.
- - Cold Rinse As Standard: No
- - Comes with a 1 year parts and labour warranty
Specifying your machine:
To help make life easier when purchasing your new glasswasher, there are a few key areas that it would be good to understand in order to make sure you get the right product to suit your needs
Do you need a drain pump (DP)?
You need a drain pump if the waste services at the site where you're installing the machine are higher than the drain outlet on the machine when it's in place. A model without a drain pump is a gravity drain model.
Do you need an integral water softener (IWS)?
All warewashing machines require a water softener of some description unless they are in a very soft water area. Integral softeners greatly improve results, prolong machine life, reduce labour costs and save valuable space. Remember, integral water softeners are cold feed only.
